Sunday, September 21, 2014

Winters A Comin'

The past two days have been breezy and warm.  I'd like to think it was nature's way of apologizing for nights that almost dipped into the 30s, but I'm thinking it's more of a nice exit for summer in front of another cold winter.  Yesterday we spent some time making ready for winter's approach.

We (and I do mean Mr Eclectic) fixed some roof shingles that had blown away.  I worked the "ground crew" position, fetching tools to bring up the ladder and weeding between the raised beds when not needed.  He removed the torn leftovers and nailed in 5 new shingles.

We also got our little Ford 120 tractor moving again.  I participated in the removal of sludge and shavings from inside the tranny casing, he drilled out a broken (by the PO) bolt, tapped in a helicoil and made a gasket.  Then it all went back together, we fetched some transmission fluid and found out the "extra" gas tank we were given had the gas filler cap in a different part and it didn't line up with the hole on the hood (to be dealt with at a later time-the tank from the tractor has 3-4 pin holes in the bottom.  Not good for holding gas).  Ah well, it's over 40 years old, it's bound to have some misaligned parts!  It did crank right up.  Now we'll work on getting the snowblower attachment hooked up and see if it's ready to throw some snow for us and the neighbors this coming winter.

AND there was also the flue and stove to be cleaned.  Yes, this should have been done in May or June, but it's been a busy year!  When we clean our stove, we try to be thorough.  We remove all of the bricks, and wire brush the ash and creosote behind them off as best as possible.  Then the flue gets swept and all the ash shoveled out of the shove.  The bricks get brushed off and reinstalled.  We clean the glass, do any paint touch ups, re-adjust the door and we're ready to go.

Here are some pics of that process.

Fire bricks out (we use a drop cloth to spread them out on, in the same pattern they came out)


If you have a woodstove and clean your own flue, here's a tip (let's not talk about how we came to decide this was a good idea).  Tie a rope to the little loop on the top (bottom, really) of the brush.  If it happens to get stuck or somehow unscrew from the pole, you can pull it out rather than disassembling the flue.

Here's the rope sticking out of the flue into the stove


The brownish pile of ash is what came out of our flue after a while season's burning (remember this is our exclusive heat source).  Not too bad.

This is the flue after a sweeping


The cap is back on and ready to go!


All cleaned up and the bricks are back in



I know it doesn't look "clean", but once you've had a fire in a stove it'll never be "clean" again, in the way a new stove is.

Now if only it takes a few months before we need to get it "dirty" again...yeah, right!  We've already had a few night time fires to take the chill off.  Hopefully it'll at least be a while before it's burning 24/7!

No comments:

Post a Comment